亲水柔软剂HOLPOSON® Water Soft

亲水柔软剂 HOLPOSON® Water Soft 是由博士团队研发的亲水性能良好的柔软剂，整理HOLPOSON®Water Soft 助剂的面料产品具有蓬松性、柔软性、滑爽性。HOLPOSON® Water Soft可直接用冷水化料，任意比例稀释，相比较传统有机硅柔软剂的化料工艺复杂、稳定性差的缺点，HOLPOSON® Water Soft 助剂化料简单方便易操作，让处理后的面料织物富有丰富的柔软手感和良好的吸水性，适用于化纤及混纺织物的后整理，特别适用于绒类化纤织物，手感的柔软性、蓬松性及滑爽性俱佳。

一、物化性能             

化学组成：聚酯、聚醚、有机硅多元嵌段共聚物

外观：黄色半透明液体

离子性：弱阳离子

pH 值：5.0±1.0

含量：45%±2.0   

二、使用方法

化 料：Water Soft 化料使用时充分搅拌均匀

浸渍法：Water Soft 用量 0.2-0.6%（o.w.f）；30℃浸渍 10-30 分钟→脱水(带液率约 70%)→烘干 100-130℃→定型 170-190℃。

浸轧法：HOLPOSON® Water Soft 用量 10-30g/L；浸轧(轧余率约 70%)→烘干 100-130℃→ 定型 170-190℃。

产品性能

1. HOLPOSON® Water Soft为高浓液体，冷水直接稀释

2. 赋予化纤织物优良的蓬松、柔软及滑爽的手感

3. 产品兼具聚酯和有机硅的手感风格，无需复配

4. 产品稳定性好，不漂油、不粘辊

贮    存

60/100/120Kg/塑料桶, 温度<30℃，储存期 6 个月

Water Absorbent Softener

HOLPOSON® Water Soft

HOLPOSON® Water Soft is a softener with good hydrophilic properties. After being treated with Water Soft, fabrics will gain fluffiness, softness and smoothness. The product can be dissolved directly with cold water and diluted in any proportion. Compared with the shortcomings of complex disolution process and poor stability of traditional organosilicon softeners, Water Soft can be easily dissolved and handled, bringing the treated fabrics rich and soft hand feeling as well as strong water absorbency. It can be used in the afterfinish of synthetic fibers and blends. It’s especially suitable for plush-like synthetic fiber textiles, generating soft hand feeling, fluffiness and smoothness.

Physical & chemical properties:             

Composition:         Multipolymer of polyester, polyether, organosilicon

Appearance:          Yellow and half-transparent liquid

Ionicity:              Weak anionic

pH:                  6.0

Concentration:        45%±2.0            

Characteristics:

1. Water Soft is a highly concentrated liquid and can be diluted with cold water directly.

2. Brings synthetic fiber textiles excellent fluffiness, softness and smooth hand feeling.

3. The treated materials own both hand feelings of polyester and organosilicon. There’s no need for mix with other agent.

4. Very stable. There will be no floating oil or roller-sticking.              

Usage:

Dissolution: Stir Water Soft thoroughly when dissolving it.

1.Impregnation process:

Dosage: 0.2-0.6% (o.w.f)

Impregnation at 30℃ for 10-30 min → dehydration (Liquid content at about 70%) → drying at 100-130℃ → heat setting at 170-190℃

2. Padding process

Dosage of Water Soft (20%): 10-30g/L

Padding (Liquid retention rate at about 70%) → drying at 100-130℃ → heat setting at 170-190℃

Storage:

1.60/100/ 120Kg/plastic barrel

2. Temperature:<30℃

3. Storage time: 6 months