浙江福尔普生新型材料有限公司
关于我们 | 繁体中文
  首页 公司介绍 新闻资讯 产品供求 人才招聘 留言订单 联系我们  
产品分类
  • 【纺织助剂】
  •    染色助剂
  •    后整理助剂
  • 联系方式
       
    会员: 第5年
    联系: 戴安娜
    手机: 18966340728
    电话: 18966340728
    传真: 0573-87760008
    微官网
     
     
    >>
    产品:耐久阻燃整理剂 阻燃整理剂 TexTrit® Pyroman
    价格:¥0 我要订购
    公司:浙江福尔普生新型材料有限公司
    电话:18966340728 戴安娜
    地区:浙江省 / 嘉兴市 / 海宁市
    点击:102

    详细:

    阻燃整理剂 TexTrit® Pyroman

     

    阻燃整理剂TexTrit® Pyroman是一种无卤的涤纶用阻燃剂,能够有效阻止涤纶纺织品火焰蔓延,处理阻燃剂TexTrit® Pyroman的面料被赋予难燃的防护功能,持久性及耐水洗性强,长期有效地发挥阻燃功能。适合全涤面料和部分涤纶锦纶混纺织物。

     

    一、物化性能             

     观            无色至浅黄色透明粘液

    离 子 性         弱阳离子

    主要成分         含磷化合物

    pH值             2~4

    溶 解 性         可溶于水

                              

    二、使用方法

    阻燃剂TexTrit® Pyroman整理的方法是浸轧法。在阻燃处理前需要做碱减量处理,以改变涤纶的吸湿性、手感,有效去除织物表面的杂质,显著提高阻燃整理效果。

    工艺配方:

    阻燃剂TexTrit® Pyroman      40~80 g/L

    工作液的配制:

    在配液槽中加入70~80%的水,再加入阻燃剂TexTrit® 火人,搅拌,然后加入其他助剂(需预先试验其是否影响阻燃效果),并加入至规定刻度,搅拌均匀。配好的工作液8小时应用完。

    工艺流程:

    织物  → 二浸二轧(轧液率60~70%)→ 烘干(80~100℃)→ 焙烘(170~190℃×1~3min)→ 水洗 → 烘干

     

    注意事项

    1.配制好的溶液请于8小时内使用

    2.对一些特殊染料,生产前应做色光变化小试

    3.上述工艺配方和工艺过程根据具体加工条件作适当调整

    4.焙烘温度必须严格控制,否则影响耐洗性和阻燃效果

     

    贮    存

    包装: 50KG\60KG\70KG塑料桶,贮存期为12个月。开包使用后应确保容器密闭

    室内存放,避免高温、严寒。

     

    Flame Retardent Finishing Agent

    TexTrit® PyroMan

     

    PyroMan is a new type  halogen-free flame retardant finishing agent, which can effectively prevent the spread of flame. The fabric treated with PyroMan is endowed with flame-retardant protection, which is highly durable and wash resistant, constantly and effectively retarding flames. It’s suitable for polyester fabric and part of polyester-nylon blends.

     

    Physical & chemical properties:             

    Appearance:        Colorless to light yellow transparent mucus

    Ionicity:            Weak cation

    Main components:   Phosphorus compounds

    pH value:           2-4

    Solubility:          Soluble in water

     

           

    Usage:

    The finishing method of PyroMan is padding. Alkali peeling is recommended before flame retardant treatment to improve the moisture absorption and hand feel of polyester and effectively remove impurities on the textile surface, thus significantly improving the effect of flame retardant finishing.

    1. Recipe:

    PyroMan: 40-80g/L

    2. Preparation of working solution:

    Add 70-80% water into the mixing tank, then add the agent RINGECOLIVE® PyroMan, stir it, and then add other auxiliaries (necessary to test  in advance whether they affect the flame retardant effect), then dilute to the specified scale, finally stir evenly. The prepared working solution should be consumed in 8 hours.

    3. Process:

    Fabric → dip and roll twice (Liquid retention rate: 60-70%) → drying (80-100 ℃) → baking (170-190 ℃ × 1-3min) → washing → drying

     

    Attentions:

    1: Please consume the prepared solution within 8 hours

    2: For some special dyes, a sample test for color change should be done before production

    3: The above recipe and process should be adjusted according to specific processing conditions

    4: The baking temperature must be strictly controlled, otherwise the wash durability and flame retardant effect will be compromised.

     

    Storage:

    1. Packaging:50/60/70Kg/plastic barrel

    2. Storage period: 12 months

    3. Ensure the container tightness after unpacking




    耐久阻燃整理剂 阻燃整理剂 TexTrit® Pyroman
    本产品二维码(请保存或打印贴在包装上)

     
    浙江福尔普生新型材料有限公司
    地址:浙江省嘉兴市海宁市马桥街道经都二路18号
    管理登录